Silvercrest DV-767 - Manual (Page 37)

35
22 Computer Installation
22.1 System Requirements
Operating System: Windows® 98SE, Me, 2000, XP or Vista
CPU: Pentium III 500 MHz or above
RAM: 64MB RAM (128 MB is recommended)
Hard Drive: 50 MB of free memory
Interface: USB 2.0 (compatible with USB 1.1)
CD ROM Drive: Yes, if the operating system is Windows 98 SE
22.2 Connecting to the Computer
Lift the protective lid on the front of the device and connect the camera as shown in the following
images:
1. Insert the small plug (mini USB) of the
connection cable into the camera’s USB socket
.
2. Insert the large end of the connection cable
into a free USB socket on your computer.
Note:
If you use a USB hub (a multiple USB port adaptor), it is possible that your computer does not
recognize the camera. In this case, connect the USB cable directly to your PC.
22.3 Driver Installation
To transfer your photos, videos or voice recordings to a computer with Microsoft Windows ME,
2000, XP or Vista, you do not need to manually install a driver. The device is set up the first time it
is used
. For more information, see the paragraph “Transferring Photos, Videos and Voice
Recordings” on page 39.
If you want to use your camera as a webcam or video camera on a computer with Microsoft
Windows ME, 2000, XP or Vista, then you must manually install the driver. This is described below
for Windows Vista, Windows ME, 2000, XP, and Windows 98SE.