Silvercrest DV-767 - Manual (Page 18)

16
Note:
ƒ The semi-automatic white balance with the settings “Sunlight”, “Tungs”, “Fluor” and “Cloudy” is
always preferable to the fully-automatic white balance.
ƒ For further information on the white balance, please read the “White Balance (WB) ” chapter
on page 45.
EV Bias
You can use the Navigation button ( e and f) to select between twelve values from –2.0
to +2.0 for the manual EV bias. The effects of the respective settings are shown immediately in the
display. Once you have found a suitable setting, you can return to the settings by pressing the
Navigation button . The following values for the EV bias are available (symbol ):
ƒ „0,0“: no manual correction
ƒ “+0.3” to “+2.0”: the image becomes lighter
ƒ “-0.3” to “-2.0”: the image becomes darker
Note:
ƒ For example, use the EV bias for recordings facing into light (“+2.0).
For further information on EV bias, please read the “EV Bias” chapter on page 45.
Metering
You can use the Navigation button (
e and f) to define the area of the image, in which
the lighting is to be measured. The following settings are available (symbol ):
ƒ “Centre“: the lighting is measured in a large area in the middle of the image
ƒ “Spot“: the lighting is measured on a small point in the middle of the image
ƒ “Matrix“: The lighting is measured at several, equally-distributed points in the image
Note:
For further information on EV bias, please read the “EV Bias” chapter on page 45.
Image Stabilizer
By using the Navigation button ( e and f) you can activate or deactivate the digital image
stabilizer.
Note:
To achieve better image capture, we recommend that you activate the image stabilizer.