SUUNTO D6I - Manual (Page 88)

Or, in the alternative displays, the following information will be shown:
•
maximum depth of last dive in meters/feet
• dive time of last dive in minutes, shown as DIVE TIME
• the current time, shown as TIME
• the current temperature in °C/°F
• cylinder pressure in bar/psi (if enabled)
If set to NITROX mode, the following information will also be shown:
•
the oxygen percentage labeled O
2
%
• the oxygen partial pressure labeled PO
2
• the current oxygen toxicity exposure labeled OLF%
7.2. Dive numbering
Several repetitive dives are considered to belong to the same repetitive dive series
when the dive computer has not counted the no-fly time to zero. Within each series,
the dives are given individual numbers. The first dive of the series will be numbered
as DIVE 1, the second as DIVE 2, the third as DIVE 3, and so on.
If you start a new dive with less than five (5) minutes of surface interval time, the dive
computer interprets this as a continuation of the previous dive and the dives are con-
sidered to be the same. The diving display will return, the dive number will remain
unchanged, and the dive time will begin where it left off. After five (5) minutes on the
surface, subsequent dives are, by definition, repetitive. The dive counter displayed in
the Planning mode will increment to the next number if another dive is made.
89