Sony T630 - Manual (Page 38)

This is the Internet version of the user's guide. © Print only for private use.
38 Calling
Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Setting the call cost
You can use the Rate function to specify the price
per call unit. If you do not specify a price per call
unit, the number of call units appears.
To enter the price per call unit
1. Scroll to Calls, Time & Cost, Call Costs, Set Rate.
2. Enter your PIN2,
OK .
3. Select Change, OK .
4. Enter the code for the currency you want,
(for example USD for US dollars), OK .
5. Enter the price per call unit, OK .
To enter a decimal point, press .
Credit limit for calls
You can enter a total amount of money
that can be used for making calls. When the
amount reaches zero, no more calls can be
made. Please note that the credit limit is only
an estimated value.
To set a credit limit
1. Scroll to Calls, Time & Cost, Call Costs, Set Credit.
2. Enter your PIN2,
OK .
3. Select Change, OK .
4. Enter an amount, OK .
Forwarding calls
If you cannot answer incoming voice,
fax or data calls, you can forward them
to another number, for example your
answering service.
For voice calls, you can choose between the
following forwarding alternatives:
• Always Forward – forward all voice calls.
• When Busy – forward calls if you are already
on the phone.
• Not Reachable – forward calls if your phone
is turned off or if you are unreachable.
• No Reply – forward calls that you do not answer
within a specified time limit (provider-
dependent).
Note: When the Restrict Calls function is on,
some Forward Calls options cannot be activated.