Sony RM-AX5000 - Manual (Page 20)

20
To synchronize with the
status of a Component
– STATUS SYNC function
LIGHT
TV
C1
UTILITY OTHER
C2 C3
MOVIE MUSIC
INPUT
POWER
ALL OFF
STATUS
SYNC
The Remote Commander memorizes the status of
the Components’ selected input, and power on/off
status. However, if you turn on/off a Component
manually or with a different remote control, the
Remote Commander may not recognize the current
Component status. In this case, use the STATUS
SYNC function to synchronize with the status of the
current Component and the Remote Commander.
1
Select the Component or XPRESS
function you want to synchronize by
pressing the Function select button.
2
Press the UTILITY button repeatedly
until “UTILITY-1” appears on the display
title.
“UTILITY-1” appears on the display title.
STATUS
SYNC
3
Press the Label button “STATUS SYNC.”
“STATUS SYNC” appears on the display title.
And the Component’s power on/off or input
select status to be synchronized appears on the
display.
Furthermore, sending signal to be synchronized
appears in the lower on the display.
STATUS SYNC
4
Press the Label button “SEND”
repeatedly until the desired status fixes,
then press the Label button “DONE.”
The display switches to the next status to be
synchronized.
STATUS SYNC
5
Repeat step 3 until your Component’s
status synchronizes.
3
2
4
4