Sony IT-M804 - Manual (Page 52)

Caller ID Features 52 US
Looking at the Caller ID list (continued)
About the “REPEAT” and “SAVE” display
“SAVE” appears if the call is “saved” (see
below).
“REPEAT” appears if there are more than
two calls from the same caller. The older data
will be replaced by the new data, so the calls
are counted as only one call (for “NEW” calls
only). When all “NEW” data is viewed,
“REPEAT” goes off.
Saving the phone numbers in the Caller ID list
As the phone stores data for up to 200 calls, if a 201st call comes in, the
oldest data is erased automatically.
To prevent important data from being erased, you can “save” them.
The “saved” data will not be erased until you erase them manually
(see page 53). If you receive a call from the number saved in the Caller
ID list, the ringer sound will change to higher tone from the second
ring. You can save up to 50 phone numbers.
1
Display the phone number you
want to save from the Caller ID
list by turning Jog Dial.
2
Press (PROGRAM) while the
number is displayed.
3
Turn Jog Dial to choose
“SAVE”, and then press Jog
Button.
You will hear a long
confirmation beep and “SAVE”
appears.
Note
If you try to save a 51st phone number, you will hear five short error beeps and
you cannot save the phone number. To save the phone number, erase one of the
saved phone numbers (see page 53).
SMITH JOHN
COPY SAVE
Jog Button