Sony IT-M804 - Manual (Page 42)

42 US Telephone Features
Phone Directory (continued)
4
Press Jog Button.
“ENTER NUMBER” appears on the display.
5
Enter the phone number by pressing the
dialing keys.
You can enter up to 20 digits, including a tone
and a pause, each of which is counted as one
digit.
6
Press Jog Button.
You will hear a long confirmation beep, and the
name and the number are stored. The display
goes off.
Notes
• A total of 200 names and phone numbers can be stored into the Caller ID list
and the Phone Directory combined.
For example, when 150 names and phone numbers are stored into the Caller
ID list, up to 50 phone numbers can be stored into the Phone Directory. If you
attempt to store a 51th phone number into the Phone Directory in this
example, or a 101th phone number into the Phone Directory, you will hear
five short error beeps and “MEMORY FULL” will be displayed. You cannot
store the phone number. To store another phone number, erase one of the
stored phone numbers (see page 44) or erase data from Caller ID list (see
page 53).
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tip
If you have entered a wrong number in step 5, press Jog Button, then follow the
procedure in “Changing a stored name and/or phone number” on page 43.
1234567