Transferring to and from other seats – Invacare TDX SP User Manual

Page 27

SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS

Transferring To and From Other Seats

ƽ WARNING

ALWAYS turn the wheelchair power OFF and engage the motor locks/clutches to

prevent the wheels from moving before attempting to transfer in or out of the

wheelchair. Also make sure every precaution is taken to reduce the gap distance.

Align both casters parallel with the object you are transferring onto.

CAUTION

When transferring, position yourself as far back as possible in the seat. This will

prevent broken screws, damaged upholstery and the possibility of the wheelchair

tipping forward.

NOTE: For this procedure, refer to FIGURE 3.5.

NOTE: Adequate mobility and upper body strength is required to perform this activity
independently.

1. Position the wheelchair as close as

possible along side the seat to which
you are transferring, with the casters
aligned parallel with the object.

2. Engage motor locks. Refer to

3. Shift body weight into seat with

transfer.

NOTE: During independent transfer, little or
no seat platform will be beneath you. Use a
transfer board if at all possible.

FIGURE 3.5 Transferring To and From

Minimize Gap Distance