Inserting sd cards, Removing an sd card, Inserting sd cards removing an sd card – Intel Fujitsu P8010 User Manual
Page 81
80 - Secure Digital Cards
Inserting SD Cards
SD Cards are inserted in the SD Card slot (Figure 26). To insert an SD Card, follow these steps
:
1
See your SD Card manual for instructions on the insertion of your card. Some cards may require that your
system is off while inserting them.
2
Make sure there is no card currently in the slot. If there is, see Removing an SD Card.
3
Insert your card into the slot with the product label facing up.
4
Push the card firmly into the slot until it is seated in the connector.
Removing An SD Card
To remove an SD Card, first see your SD Card manual for instructions. Some cards may require your
LifeBook notebook to be in Suspend Mode or Off while removing them. Prior to removing the card from
the slot, first select it using the Safely Remove Hardware icon in the notification area. To remove the
card, push it in to release it, then pull it out.
•
I
NSERTING
OR
REMOVING
AN
SD C
ARD
DURING
YOUR
L
IFE
B
OOK
NOTEBOOK
’
S
SHUTDOWN
OR
BOOTUP
PROCESS
MAY
DAMAGE
THE
CARD
AND
/
OR
YOUR
L
IFE
B
OOK
NOTEBOOK
.
•
D
O
NOT
INSERT
A
CARD
INTO
A
SLOT
IF
THERE
IS
WATER
OR
ANY
OTHER
SUBSTANCE
ON
THE
CARD
AS
YOU
MAY
PERMANENTLY
DAMAGE
THE
CARD
,
YOUR
L
IFE
B
OOK
NOTEBOOK
,
OR
BOTH
.