Intel Peavey ReValver MK III - Manual (Page 16)

Module name = ‘62 BluesMaker
Description = Loosely based on a 1962 classic, this amp has 2 channels, normal and tremolo. The
original amp did not have a “Drive” control, but we put one here to modu late the distortion in the
power amp.
Module name = ACM 900
Description = This amp is modeled after a “Rock & Roll” amp built with both valve and solid state
components. It has only 1 channel but the two gain knobs control the gain at two stages in the
preamp.
Module name = HomeBrew PP-2
Description = The HomeBrew PP-2 is a low-wattage, push-pull amp with two channels and a
British-style tone stack.
15