Icom I706MKTMG - Manual (Page 6)

■ Function switches
D M1 FUNCTIONS
SPLIT OPERATION (p. 29)
Toggles the split function ON and OFF.
• “ä”appears when the split function is ON.
• The function of [F-3] changes to XFC when the
split function is ON.
VFO A/B SELECTION (p. 16)
➥ Toggles between VFO A and VFO B in
VFO mode.
➥ Toggles between transmission VFO and
reception VFO during split operation.
➥ Toggles between the transmit and
receive frequencies (and modes) of
memory channels when the split func-
tion is turned ON.
VFO EQUALIZATION (p. 16)
Equalizes the frequency and operating
mode of the two VFO’s.
• The rear (undisplayed) frequency and operat-
ing mode are equalized to the front (displayed)
VFO frequency and operating mode.
TRANSMIT FREQUENCY CHECK (p. 29)
Appears when the split function is turned
ON—monitors the transmit frequency
when pushed and held.
• While pushed, the transmit frequency can be
changed with the main dial.
D M2 FUNCTIONS
MEMORY WRITE (p. 40)
Stores the displayed frequency and oper-
ating mode into the displayed memory
channel.
MEMORY TRANSFER (p. 41)
Transfers the frequency and operating
mode in the selected memory channel to a
VFO.
VFO/MEMORY (p. 39)
Toggles between VFO and memory
modes.
MEMORY CLEAR (p. 39)
Clears the selected memory channel’s
contents.
• “}” appears.
D M3 FUNCTIONS
NARROW FILTER (p. 23)
Toggles the narrow filter (or wide filter—
push for 2 sec.) ON and OFF.
• “ã”appears when the narrow filter is ON; “ç”
appears when the wide filter is ON.
• An optional narrow filter and presetting in initial
set mode (p. 51) is necessary to use the fol-
lowing:
CW/RTTY narrow: FL-100, FL-101 or FL-232
SSB narrow: FL-223
SSB wide: FL-103
NOISE BLANKER (p. 21)
Turns the noise blanker ON and OFF.
• The noise blanker does not function in FM and
WFM modes; the “AM Noise blanker” item in
initial set mode must be set to ON for the noise
blanker to work in AM mode (p. 53).
METER SELECTION (p. 25)
Selects the type of meter displayed (during
transmit) in the function display.
• Power, ALC or SWR metering can be select-
ed.
• Only an S-meter is available for receive.
D M4 FUNCTIONS
DURING SSB/AM OPERATION :
DURING CW OPERATION :
DURING RTTY OPERATION :
DURING FM OPERATION :
F-3
MET
F-2
NB
F-1
FIL
F-2
MCL
F-3
V/M
F-2
MÜV
F-1
MW
F-3
XFC
F-3
A=B
F-2
A/B
F-1
SPL
3
1
PANEL DESCRIPTION
MENU
M3
F-1
FIL
F-2
NB
F-3
MET
MENU
M4
F-1
VOX
F-2
COM
F-3
AGC
MENU
M4
F-1 F-2
BRK i/4
F-3
AGC
MENU
M2
F-1
MW
F-2
MÜV
MCL
F-3
V/M
(in memory mode)
MENU
M4
F-1
1/4
F-2 F-3
AGC
MENU
M4
F-1
VOX
F-2
TSQ
F-3
TON
MENU
M1
F-1
SPL
F-2
A/B
XFC
F-3
A=B