Icom I706MKTMG - Manual (Page 36)

33
4
RECEIVE AND TRANSMIT
D Connections for CW
D CW operation
➀
Connect a paddle or straight key as above.
➁
Select CW (or CWå) mode with [MODE].
➂
Set CW break-in operation as semi break-in, full
break-in or OFF.
• Push [DISPLAY] one or two times to select M, if necessary.
• Push [MENU] one or more times to select M4.
• Push [
(F-2) BRK] one or more times to select the desired
condition:
➧ “F-BK”: full break-in
➧ “BK”: semi break-in
➧ No indicator: no break-in (ACC socket connection is
necessary as above.)
➃
Set the CW delay time when semi break-in opera-
tion is selected.
➥ Push [DISPLAY] for 2 sec. to select quick set
mode; push [MENU] one or more times to select
Q3 BK-IN DELAY; then rotate the main dial
to set the desired delay time (see p. 48 for
details).
CW
Q4 CW PADDLE
CW
CW
CW
CW
Paddle
[ELEC KEY]
[MICROPHONE] See p. 34 for
connection details:
Paddle operation from
front panel MIC connector.
Straight key
Microphone
Quick set mode setting Rear panel
4
8
12
144/430 MHz
HF/50 MHz
[ACC]
1 2 3
7 6 5
9 10 11
13
For no break-in operation:
Connect an external switch such
as a foot switch; or use the
RTTY SEND terminal for all
bands. (See p. 35.)
■ Functions for CW
BK
VFO A
CW
CW
Q3 BK-IN DELAY
M4 BRK 1/4 AGC
CW mode and semi
break-in operation is
selected.
Delay time of 6.0 dots is
selected in quick set
mode for semi break-in
operation.
CH P O
S1
5
5 3 7 9 20 40
10
60dB