Specifications – Insignia NS-A1000 User Manual

Page 13

Insignia NS-A1000 Car Stereo Amplifier

www.insignia-products.com

Specifications

H PF

Set for High Pass Filter frequency (40 Hz to
250 Hz).

Remote bass
control knob

Turn clockwise to increase the bass output of your
amplifier (0-18 dB) without adjusting the amplifier.

X-Over

Set for High Pass Filter, Low Pass Filter, or Full.

L PF

Set for Low Pass Filter frequency (40 Hz to
250 Hz).

Power/
protection
indicator LED

Green LED lit—Amplifier is on and functioning
correctly.
Red LED lit—Amplifier is in self-protect mode.

Line Output

Use these connections to feed audio to a second
amplifier. Line output is affected by the cross-over
settings on the amplifier.

Model

NS-A1000

@ 2 Ohms

155 W × 2 channels
@ 1% THD

@ 4 Ohms

110 W × 2 channels
@ 1% THD

Mono

320 W @ 1% THD

Signal to Noise ratio

>98 dB

Channel separation

>55 dB

Frequency response ±1.0 dB

10 Hz - 30 KHz

HPF

40 Hz - 250 Hz

LPF

40 Hz - 250 Hz

Adjustable sensitivity range

0.2-1 V

Input - low level

10K Ohms

Impedance - high level

100 Ohms

Fuse

25AX2

Dimensions (W × H × L)

10.2 Ч 2.1 Ч 12.8 in
(25.9 Ч 5.33 Ч 32.5 cm)

Item

Name

Function or Control