beautypg.com

Ata (automatic tracking aid), Int. setting – Icom MR-1000TTM User Manual

Page 11

background image

7

3

MENU

ATA (Automatic Tracking Aid)

D ATA
• OFF

: Turn the ATA function OFF.

• ON

: Turn the ATA function ON.

D No.DISP
• OFF

: Non display any mark number.

• Sel

: Display the selected mark number

only.

• ALL

: Display all mark numbers.

D VECT
• TRUE

: Select the true vector mode.

• REL

: Select the relative vector mode.

D OWN VECT
• OFF

: Non display the own ship vector.

• ON

: Display your own ship’s vector.

D ALARM (CPA/TCPA)
• OFF

: Turn the alarm function OFF.

• ON

: Turn the alarm function ON.

D CPA* LIMIT
• 0.1 to 10.0NM : Set the CPA (Closest Point of Ap-

proach) limit with [Ω ≈].

D TCPA* LIMIT
• 1 to 60MIN

: Set the TCPA (Time to CPA) limit time

with [Ω ≈].

*CPA/TCPA: Closest Point of Approach and Time to Clos-

est Point of Approach limit is defined by the observer to
given warning when a target or targets are close to
within those limits from your own ship.

INT. SETTING

D MAG VAR
• AUTO

: Revise magnetic variation automatically.

NOTE: NMEA data is required. NEVER select
“AUTO” without NMEA data, incorrect varia-
tion data may entered. (p. 3

9

)

• MANUAL : Revise magnetic variation manually.

• Push [≈] to select [MANUAL], then push

[Ú]. Set the revise value with [Ω ≈].
Push [Ú] or [MENU] to abort the menu.

D BRG INPUT
• NMEA

: NMEA0183 bearing data format.

• N+1

: N+1 data format.

• AUX

: Other format.

• GPS

: Reads NMEA0183 COG format data as

HDG format.

D SPD INPUT
• GPS

: Use the GPS NMEA speed data.

• LOG

: Use the speed sensor data.

D TX INH START
• 0 to 359° : Push [Ω ≈] to enter the start point of the

TX inhibit area.

D TX INH ANGLE
• 0 to 90°

: Push [Ω ≈] to enter the TX inhibit area.

D SAVE TIME
• 1M, 6M, 15M or 30M

: Select the stand by time during save

mode.

* The radar for TX interval scan is fixed at 10 revolutions.

D SYMBOL
• 1/2/3

: Select the symbol brightness.

D CHARACTER
• 1/2/3

: Select the character brightness.

D KEY ILLUM
• 1/2/3/4

: Select the key illumination brightness.

INT. SETTING

BRG INPUT
SPD INPUT
TX INH START
TX INH ANGLE
SAVE TIME

SYMBOL

CHARACTER

BRILL

NMEA

30M

LOG

6M

15M

MANUAL

AUTO

N+1

AUX

GPS

GPS

0

˚

0

˚

KEY ILLUM

MAG VAR

1

2

3

1

2

3

1

2

3

4

7.2

˚

W

1M

A T A MENU

VECT

No.DISP

OFF

ALL

OWN VECT
ALARM
CPA LIMIT
TCPA LIMIT

TRUE

ON

ON

ON

OFF

REL

OFF
OFF

1.0NM

1 MIN

A T A

SEL

MR-1000R2_T2.qxd 04.2.24 10:22 Page 7

This manual is related to the following products: