iLive T SERIES AP6526 - Manual (Page 97)

ALLEN & HEATH iLive Reference Guide AP6526 iss.3 97
Audio monitoring:
2x PAFL headphone amps (MixRack and Surface)
2x sockets on surface - standard 1/4" and 3.5mm mini jack
Surface local PAFL stereo monitor – iLive = XLR, T Series = TRS
Surface stereo PAFL balanced XLR audio inputs (iLive only)
Select and listen to any point in the signal path
Separate input and mix PFL or AFL (in-place) selection
Cancel all PAFL function
Auto cancel or additive PAFL mode
AFL trim up to 12dB gain
Link SEL and/or MIX function to PAFL user preference
Dual engineer’s monitor outputs (wedge/in-ear systems)
Solo-in-Place with SIP safes
Input channel processing:
Preamp – gain, pad, polarity, 48V
HPF – 12dB/octave swept 20-400Hz
Gate – threshold, depth, hold, attack, release, sidechain filter + listen select
PEQ – 4 band fully parametric, filter type shelf/bell on HF and LF
Compressor – threshold, ratio, attack, release, various auto modes, soft knee, gain,
sidechain filter + listen select
Limiter/de-esser – threshold, de-ess frequency, sidechain filter + listen select
Delay – up to 170ms
Insert assignable, bypass, +4/-10 operating level
Mix processing:
PEQ – 4 band fully parametric, shelf selectable on HF and LF
GEQ – 1/3 octave, 25 band, and fader control
Compressor – threshold, ratio, attack, release, auto, gain, sidechain filter + listen select
Limiter – threshold, sidechain filter + listen select
Delay – up to 340ms
Insert assignable, bypass, +4/-10 operating level
RackExtra (iDR-64):
8x internal stereo FX racks (devices)
Patch as send/return or inserted FX
Send from FX bus, Aux bus or channel direct output
Return via short path with PEQ, or input channel with full processing
Memories:
Libraries – Gate, PEQ, GEQ, Compressor, Limiter, De-esser, FX, IP channel, Mix master
Scenes – Selectable parameters, safes, name and comment
Shows – Stores configuration, current settings, all scenes, libraries, name
User Profiles - Administrator + 7x guest users, selectable permissions, passwords
USB memory key to transfer/archive Library and Show memories
Additional functions:
User assignable channel names, 5 characters
User assignable channel colours, 7 colours + off
Alt view channel LCD display function
Freeze in layers strip function
User assignable meters
Simultaneous view of all graphic EQ bands on faders
Talkback assignable to any combination of mix buses
Internal signal generator:
Swept frequency sine wave, swept bandpass, white, pink noise
Copy/paste/reset editing of channel and mix parameters
Quick all channel mix assign and pre/post selection
Power supplies:
2x iDR10 MixRack PSU modules (Second for redundant backup)
1x surface internal PSU module
Optional iPS10 2U rack PSU for iLive surface redundant backup
MixRack power requirement 100-240V.AC, 47-63Hz, 320W max
Surface power requirement 100-240V.AC, 47-63Hz, 320W max
Temperature monitoring at surface for all supplies and circuits