beautypg.com

Diagram 5 – Impex WM 1403 User Manual

Page 9

background image

STEP 5 (See Diagram 5)

A.) Attach the Front Press Base (#12) to the Upper Frame (#4). Secure it with one 5 7/8” Axle

(#60), two

1” Axle Washers (#64), and two M10 Aircraft Nuts (#55). Do not over tighten

the nuts. Make sure the Base is able to swivel.

B.) Attach the Front Press Stopper (#8) and Butterfly Pulley Frame (#9) to the Front Upper

Vertical Beam (#5). Align the holes and secure them together with two M10 x 2 ½” Carriage
Bolts (#42),

¾” Washers (#53) and M10 Aircraft Nuts (#55).

C.) Insert the Lock Pin (#80) into the hole on the Front Press Stopper (#8) to lock the Base in

place. Note: Remove the Pin when doing Front Press exercise. Lock the pin when doing
Butterfly exercise.

DIAGRAM 5

8