Diagram 6 – Impex WM 1403 User Manual

Page 10

STEP 6 (See Diagram 6)

A.) Attach a Rubber Bumper (#38) to the Leg Developer (#11). Secure it with one M6 x 5/8”

Philips Screw (#41). Attach the Leg Developer to the bracket on the Main Seat Support (#7).
Secure it with one M10 x 3” Allen Bolt (#44), two

∅

¾” Washers (#53), and one M10 Aircraft

Nut (#55).

B.) Insert the Arm Curl Stand (#67) into the top opening on the Main Seat Support. Use a Lock

Knob (#66) to secure it and obtain the desired Arm Curl exercise position.

DIAGRAM 6