Impex WM 1403 - Manual (Page 19)

STEP 12 (See Diagram 12)
A.) Insert two Foam Roll Tubes (#27) halfway through the holes on the Main Seat Support (#7)
and Leg Developer (#11). Push four Foam Rolls (#26) onto the tubes.
B.) Connect the Arm Curl Handle (#70) to the Lower Cable with two C-clips (#57) and one Long
Chain (#79). Note: Remove the Arm Curl Handle and the Chain when using the Leg
Developer.
C.) Attach the Lat Bar to the Upper Cable with a C-clip.
DIAGRAM 12
18