beautypg.com

Insignia NS-H3005 User Manual

Page 22

background image

20

Insignia NS-H3005 Home Theater System

www.insignia-products.com

8 Press once. Recording starts and the REC

indicator lights in the display window.

9 Press

twice to stop recording.

Pausing the recording

To pause while recording:
1
Press to pause the tape during recording.

The REC indicator flashes in the display
window.

2 When you want to continue recording, press

or .

Recording a program while watching another

To record one television program while
watching another:
1
Press TV/VCR to select the TV mode while

recording. The TV indicator appears.

2 Select the channel to be viewed using the

tuner on your television.

Timer Recording

You can program your VCR to record up to eight
different recordings. You can program these
recordings up to one year in advance. For
unattended recording, the timer needs to know
the channels to be recorded and the starting and
ending times.

To program the VCR to record a future
program:
1
Turn on the television and home theater

system.

2 Tune the television to the home theater

system output channel (CH 3 or 4) or set the
television’s source selector to VIDEO.

3 Press VCR on the remote or on the front

panel of the home theater system until the
VCR indicator lights in the display window
and VCR appears on the television screen.

4 Insert a video tape with the anti-erasure

safety tab intact.

5 Press MENU. The Main menu appears.

6 Press

or

to choose PROGRAM, then

press MEMORY/ENTER. The Program menu
appears.

7 Press

or

to choose the program

number (1-8).

8 Press

to choose MONTH.

9 Press

or

to choose the month.

10 Press

to choose DAY.

11 Press

or

to choose the day.

12 Press

to choose START.

13 Press

or

to choose the start time.

14 Press

to choose STOP.

15 Press

or

to choose the stop time.

16 Press

to choose CHANNEL.

17 Press

or

to choose the channel

(Channel, LINE1, or LINE2).

18 Press

to choose SPEED.

19 Press

or

to choose the recording speed

(AUTO, SP, or SLP).

Auto mode determines how much tape is left
and switches speed from SP to SLP, if
necessary, to complete recording the
program. There will be some picture and
sound distortion at the point of the speed
change.

20 Press

to choose REPEAT.

21 Press

or

to choose how often to repeat

(ONCE, WEEKLY, or DAILY).

ONCE

for recording up to eight

programs on a single day or over the days
within a period of one year.

WEEKLY

for recording up to eight

programs on a certain day of every week.

Note

REC indicator appears only when the Output
Source is set to VCR.

If a tape with no anti-erasure safety tab is
loaded, the tape is automatically ejected.

Note

If the tape reaches the end before

is pressed,

the home theater system automatically stops,
rewinds and ejects the tape, then turns itself off.

Note

After five minutes in Pause mode, the tape
stops automatically to protect the tape and the
video heads.

Always use for best results when making
changes while recording. For example: To
change channels while recording, first press
to put the VCR in Pause mode. Select the
channel on the home theater system, then
press again to resume recording.

Note

If you try to set the program timer before setting the clock,
PLEASE SET THE CLOCK appears for a moment and then
the Clock menu appears on the television screen. Set the time
and date before proceeding.

Note

If the anti-erasure safety tab has been removed
the tape is automatically ejected.

Note

If all eight programs have been entered, FULLY
PROGRAMMED
appears for a moment and then
PROGRAM 1 appears on the television screen.

Note

Cable Users: If you have cable TV and use a
cable box converter (see“Connecting antenna or
cable TV to the home theater system” on page 7),
you must set the channel in this step to match the
cable box output channel (usually CH 3 or 4). Set
the channel on the cable box instead of with the
home theater system.