beautypg.com

Insignia NS-H3005 User Manual

Page 10

background image

8

Insignia NS-H3005 Home Theater System

www.insignia-products.com

Connecting the home theater system to
the television

Connect the home theater system to your
television using one of the following methods:

“RF coaxial connection” on page 8

“Audio/Video connection” on page 8

“Component Video (ColorStream®)
connection” on page 8

“Progressive Scan (ColorStream® pro)
connection” on page 9

RF coaxial connection

Connect the ANTENNA/CABLE OUT jack on the
home theater system to the ANTENNA in jack
on the television using the 75-ohm coaxial cable.

To set the home theater system’s RF output
channel:
1
While the home theater system is turned off,

press and hold CH/PRESET (-/+) on the front
panel for about five seconds. The home
theater system turns itself on and RF-03 or
RF-04 appears in the display window.

2 Press CH/PRESET (-/+) on the front panel to

change the RF output channel (CH 03 or CH
04).

3 Turn the home theater system off, then turn it

on again.

4 Select the television’s CH to 3 or 4 depending

on the RF output channel you selected.

Audio/Video connection

To connect the home theater system to the
television using the A/V jacks:
1
Connect the home theater system VIDEO

OUT jack on the home theater system to the
video in jack on the television using the
supplied video cable.

2 Connect the left and right home theater

system AUDIO OUT jacks on the home
theater system to the audio left/right in jacks
on the television using the supplied audio
cables.

Component Video (ColorStream

®

)

connection

Note

If you use this connection, tune the television to the home
theater system’s RF output channel (CH 3 or 4).

Back of home theater system

Cable TV
wall jack

Back panel of typical
cable box

Coaxial
cable

Back of home theater system

Note

If you use this connection, set the television’s source selector
to VIDEO.

Note

DVD playback can also be done using the COMPONENT/
PROGRESSIVE SCAN VIDEO OUT connection. The tuner
and VCR only output through the RF.OUT (R) or home theater
system OUT (A, V) jack.

Video

Audio

Back of home theater system