IBM TIVOLI ADSTAR 5697-VM3 - Manual (Page 42)

a
If receiving the RSU from tape
vmfins install info (nomemo
b
If receiving the RSU from an envelope file
vmfins install info (nomemo env rptfnum
5
Determine DASD sizes for disks to receive service
In order to receive the service from the RSU Tape, you need to have
adequate space available on the alternate APPLY and DELTA disks. The
required sizes are identified in the Tivoli ADSM for VM documentation
(5654A09A MEMO D) received in the previous step.
6
Setup the correct minidisk access order
vmfsetup 5654A09A {ADSM | ADSMSFS}
Use ADSM for installing on minidisks or ADSMSFS
for installing in Shared File System directories.
7
Merge the APPLY disks for Tivoli ADSM for VM
Next, you must prepare your system to receive the service from the RSU
Tape. To do this, you must first clear the alternate APPLY disk for receipt of
the service from the RSU Tape.
Enter the VMFMRDSK command to merge the alternate APPLY disk to the
production APPLY disk. This will clear the alternate APPLY disk.
vmfmrdsk 5654A09A {ADSM | ADSMSFS} apply
Use ADSM for installing on minidisks or ADSMSFS
for installing in Shared File System directories.
8
Obtain additional information about the Tivoli ADSM for VM service on the
RSU and how it will affect your local modifications by invoking the VMFPSU
command. This command creates an output file, appid PSUPLAN, which
you can review. See VM/ESA Service Guide for an explanation of this file.
vmfpsu 5654A09A {ADSM | ADSMSFS}
38
Tivoli ADSM for VM Program Directory