IBM PS1500 - Manual (Page 85)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sounds & Presets 4•21
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
SAVING CHANGES TO A DIFFERENT
PRESET (OR CREATING A NEW ONE)
1. Press STORE PRESET.
The «Preset Store» window opens showing
the current Preset at the centre and the des-
tination Preset at the “TO:” location.
Preset numbers 1…8 correspond to Preset
1, 9…16 to Preset 2 and so on.....
2. Rotate the Dial to select the Preset destination.
You can choose from the 64 memory loca-
tions available.
Store Preset
1 STORE
PRESET
2
3
ENTER ESCAPE
3. Press ENTER to confirm, or ESCAPE to cancel.
After the save operation, the display returns
to normal showing the new Preset.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ Note: Whatever Preset data is present at the
selected destination will be cancelled by the
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
incoming modified Preset.
Preset Store:01GrandP TO:01GrandP
Are you sure? Press [ENT] or [ESC]
01GrandP
O2PnoStr. .
...
63Preset63..
64Preest64