IBM PS1500 - Manual (Page 31)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Quick guide 1•15
general Effect volumes and loudness
REGULATE THE GENERAL EFFECT
VOLUMES AND ACTIVATE LOUDNESS
It is possible to regulate the general effect vol-
umes to suit the surroundings and activate the
Loudness function.
Although each Preset recalls appropriate effect
volume settings for each track, a general setting
can be applied to render the effects more or less
intense with a single command.
The Loudness control introduces a particular
equalisation (a simultaneous control of the Bass
and Treble tones - similar to that found on home
stereo units). When Loudness is ON, it favours
certain frequencies at low volume.
1. Press the GENERAL button in the EDIT section).
2. Press the PAGE+/BANK button once.
3. Select the parameters with the Function buttons:
Rev=Reverb (F1/F2), Eff=Effect (F3/F4),
Loud=Loudness (F5/F6).
4. Modify the selected parameter, either with the
Dial, or with the Sliders F1 … F8.
DIAL: Rotate the DIAL to change the status
of the selected parameter.
SLIDERS F1…F8: When you enter any Edit
situation, the Sliders F1…F8 activate as data
entry devices automatically. Use the sliders
to change the parameter values directly with-
out selecting them first.
TOGGLE THE F BUTTON: You can toggle
between the ON and OFF status of the
LOUDNESS option by pressing Function
button F7 or F8 repeatedly.
5. Press ESCAPE or GENERAL to exit Edit General.
The settings remain in memory (RAM) after
turning off the instrument.
1/2
3/4
2/5 GENERAL:[EFFECT VOLUME]
Rev=127 Eff=127 Loud=on
5
PAGE+ / BANK+
PAGE– / BANK–
MAX
MIN
DRUMS
ACCOMPANIMENT
BASS ACCOMP.1 ACCOMP.2 ACCOMP. 3 LOWER UPPER 2 UPPER 1
F1 F2 F3 F4 F5 F6 F7 F8
ENTER ESCAPE
OR
F1 F2 F3 F4 F5 F6 F7 F8
GENERAL
GENERAL