IBM PS1500 - Manual (Page 75)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sounds & Presets 4•11
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ASSIGNING SOUNDS TO TRACKS
The method described on page 3 refers to the
direct method applied to the three keyboard
tracks.
To assign Sounds to the tracks not shown in the
main display (Style, Song/Style, Song or a MIDI
Preset used by an external MIDI device), use the
method described below.
1. Press PRESET in the EDIT section.
The first page of «Edit Preset» opens show-
ing the Program Changes assigned to tracks
1-8 of the current Preset.
Press TRACK SELECT to view tracks 9-16.
The selected track is shown by the flashing
ProgramChange number (PC). The corre-
sponding name and Track number is also dis-
played in the top right hand corner.
2. Select a track (Pr. Change) with the correspond-
ing Function button.
The Pr. Change number starts to flash.
3. Press a SOUND GROUPS button.
The timeout display shows 8 Sounds to
choose from.
4. Select a Sound using the Function buttons.
Each Group contains 3 Banks. Use the
Page+/Bank+ or Page–/Bank– buttons until
the required sound is displayed.
The Sound is assigned to the selected (flash-
ing) track. The display returns to the previ-
ous status showing the updated situation.
The new situation remains in memory as a
temporary status until changed again, or un-
til you recall the default conditions by select-
ing the same Preset again.
Assigning Sounds to tracks
1 PRESET
1/9 PRESET:PROGRAM [Bk2:STAND1 Tk01]
113 15 29 26 50 50 49 1
2
3
Bk1 PIANO2 HONKY EL.PN2 CLAVIN
PIANO1 PIANO3 EL.PN1 HARPSI
4
TRACK
SELECT
F1 F2 F3 F4 F5 F6 F7 F8
REED
PIANO MALLET
FLUTE
ORGAN
SYN LEAD
GUITAR
SYN PAD
BASS STRINGS
SYN SFX ETHNIC
ENSEMBLE
PERCUSSIVE
BRASS
SFX
SOUND GROUPS
F1 F2 F3 F4 F5 F6 F7 F8