Intermec 6620 - Manual (Page 119)

SECTION 8 CMOS Setup
6620 Hand-Held Computer Technical Reference 8-5
"
Boot Device:
Sets the order in which to search for a bootable drive:
"
Scan PC Card slots (default)
"
Embedded Flash Drive (EFD)
"
Floppy Drive
"
Hard Drive
"
PC Card Slot–0 Drive
"
PC Card Slot–1 Drive
"
PC Card Slot–2 Drive
See page 8-13 to learn about the 6620 Drive Mapping.
"
Boot Options:
(Submenu — press [Enter] to access the submenu)
"
Floppy check:
Controls the search for an attached floppy drive
during POST. Leaving this disabled allows for
hot-swapping the floppy drive. Press the [Esc]
key to return to the Main menu.
"
Numlock:
Selects the Power-on state for the [Num Lock] key —
Auto (default), On, or Off.
"
System Memory:
(Read-Only) Displays system memory.