Integra DSR-7.3 - Manual (Page 61)

61
Changing the Audio Language (Multi-
Language Function)
Dolby Digital, PCM, and other audio data can be recorded on
DVDs in a number of languages or audio tracks, letting you
choose the desired language or audio.
Press Audio repeatedly to select the
desired language.
Pressing Audio once displays the currently
selected language. Subsequent presses
rotates through the audio languages
available on the DVD.
Audio : 1 English
Dolby Digital
5.1CH Audio : 2 Spanish
HELLO HOLA
Dolby Digital
5.1CH
Notes
• You cannot switch languages if there is only one language
recorded on the disc.
• Switching the audio language may not be possible with some
titles. In this case, the mark will be displayed.
• For some titles, selection can be made using the DVD menu.
In these cases, press Menu to display the DVD menu screen and
then make your selection.
• When you erase the resume position or replace a disc, the DVD
receiver returns to the automatic setting in the setting menu
(page 73).
■ Changing Audio Type VCD MP3
For enjoyment of karaoke or similar format Video CDs and MP3s it is
possible to select stereo audio, or either right or left channel mono
depending on the requirements of the source.
Press Audio repeatedly during playback to switch the audio
type.
Audio output changes from [1/L] (Left channel) to
[2/R] (Right channel) to [Stereo].
Note
With karaoke and other discs, set the appropriate audio type for
singing and accompaniment after referring to information on the disc
jacket or accompanying material.
Selecting a Subtitle Language
(Multi-Language Subtitles)
You can select a desired subtitle language with DVDs that
have subtitle data in multiple languages recorded on them.
Press Subtitle repeatedly during
playback.
Pressing Subtitle once displays the
currently selected subtitle language.
Subsequent presses rotates through the
subtitle languages available on the DVD.
Notes
• The subtitle language cannot be switched if the subtitle language
is not recorded, or if only one language is recorded.
• Switching the subtitle language may not be possible with some
discs. In this case, the mark will be displayed.
• To clear subtitles during playback, press Subtitle and then press
Clear, or press Subtitle until [Off] appears.
• For some discs, subtitle language selection can be made using
the menu on the DVD. In this case, press Menu to display the
DVD menu screen and then make your selection.
• When you erase the resume position or replace a disc, the DVD
Receiver returns to the automatic setting in the setting menu
(page 74).
Selecting the Audio/
Subtitle Language
Send
On Standby
Op en/ Clos e
2
T- D Setup IPM
SW Mode Distance
T-D/ ST
A- B
Surround A.Control
-- / ---
Mode
Enter
Repeat
Muting
Up/ Down
SP Setup Test Tone CH Sel
RC- 507M
Audio
Last M Program Random
Late Night Timer
Angle
Clear
Subtitle FM Mode
Input Selector
ENTER
Light
TV
Display
VOL C H
T V In pu t Setu p
DV D
Recvr Tape
Tun
Step/ Slow
To p M enu Men u
Retu rn
Clo ck Sle ep
Dimm er
1 2 3
4 5 6
+10 Search 0
7 8 9
Menu
Clear
Subtitle Audio
Audio : 1/L Audio : 2/R
Audio : Stereo
HELLO! HOLA!
Subtitle :1 English Subtitle :2 Spanish
DVD DVD
Audio
Subtitle