Integra DSR-7.3 - Manual (Page 44)

44
Using the Timer Functions
Setting the record timer
Be sure to preset FM and AM stations beforehand
(page 35).
Caution
• If the current time is not set, you cannot preset the playback timer
make sure that the current time is set.
• Except for EVERY, all record timers record only once. When the
recording is finished, the timer is deactivated.
• The record timer can only be used with an z -connected
Integra/Onkyo cassette tape deck or MD recorder.
Send
On Standby
Op en/ Clos e
2
T- D Setup IPM
SW Mode Distance
T-D/ ST
A- B
Surround A.Control
-- / ---
Mode
Enter
Repeat
Muting
Up/ Down
SP Setup Test Tone CH Sel
RC- 507M
Audio
Last M Program Random
Late Night Timer
Angle
Clear
Subtitle FM Mode
Input Selector
ENTER
Light
TV
Display
VOL C H
T V In pu t Setu p
DV D
Recvr Tape
Tun
Step/ Slow
To p M enu Men u
Retu rn
Clo ck Sle ep
Dimm er
1 2 3
4 5 6
+10 Search 0
7 8 9
Timer
2/3/5/∞
ENTER
4
ENTER
ENTER
«
ENTER
1
2
«
Timer
ENTER
ENTER
ENTER
«
ENTER
ENTER
«
3
ENTER
ENTER
«
Repeatedly press Timer on the
remote control to select REC.
Press ENTER after selecting “REC”.
Press ( 5/∞) to select the recording
source.
Select TV, FM or AM then press ENTER.
Repeatedly press ( 5/∞) to select
the recording start time.
When the desired time is displayed, press
ENTER.
Tip
• When setting the timer for MD recording, set
the recording to start one minute in ahead
since there are cases when recording will not
start for a few seconds.
• When set to the desired playback start time
(ON) is set, playback is automatically set to
stop (OFF) in an hour.
• When using the 24 hour display, if you first
press Mode DVD, you can use the number
buttons to set the time.
Press ( 5/∞) to set the recording
end time.
Display the desired time, then press
ENTER.
5
ENTER
«
7-1
The current day lights up.
The selected day blinks.
ENTER
ENTER
«
6
Press ( 5/∞) to select the desired
radio station.
Display the desired radio station, then
press ENTER.
Press the ( 5/∞) cursor buttons to
select ONCE or EVERY, then press
ENTER.
If you select ONCE, proceed to step 7-1. If
you select EVERY, proceed to step 7-2.
Caution
Setting the recording timer to ONCE will only
record one time.
ONCE recording:
Press ( 5/∞) to select a day (or NEXT).
(Displays when your next set time)
OR
(Selects the day of week)
Press ENTER. The timer indicator lights
up.