Marantz SR5500 - Manual (Page 26)

ENGLISH
23
T h e s i g n a l c a n n o t b e c o n v e r t e d f r o m t h e
component to the video or S-video.
Notes of OSD menu:
• The setup menu can be displayed through all
video out (COMPONENT, S-VIDEO, VIDEO).
• The setting informations (e.g. volume setting) are
displayed through all video out when the VIDEO
CONVERT function are set ENABLE.
Note:
No setting information is displayed when the
signal is emitted from the COMPONENT IN to
COMPONENT OUT.
• The setting informations (e.g. volume setting) are
displayed through the S-VIDEO or VIDEO out
when the VIDEO CONVERT function are set
DISABLE. When the S-VIDEO and VIDEO
outputs are used simultaneously, the setting
informations are displayed through the S-VIDEO
out only.
SELECTING THE SURROUND MODE
Example: AUTO SURROUND
To select the surround mode during playback,
press the
SURROUND MODE button on the front
panel or the Surround mode buttons on the
remote.
VIDEO CONVERT
When this function is activated, the video or
S-video signal can be emitted from the video, S-
video or component video output terminal.
To activate this function, select VIDEO CONVERT
in PREFERENCE menu and set ENABLE.
Notes:
• The component video signal is emitted only from
component video output terminal.
When the video equipment is connected by
component terminal, connect the monitor and
SR5500 by the component terminal.
• This function is unavailable for the REC out
terminal.
• This function is unavailable for the still picture, fast
forward and reverse playing of the video component.
• If, while attempting to use the video convert
feature, the SR5500 cannot synchronize with the
display device, “NO SIGNAL” appears on the
monitor, or noise is generated, this feature cannot
be used. All of these signs are caused by
equipment incompatibility; there is nothing
wrong with the SR5500.
In such case, set VIDEO CONVERT in the
PREFERENCE menu to DISABLE. Also, connect
the video input signal to the display device via the
MONITOR OUT terminal under VIDEO and the
S-video input signal to the display device via the
MONITOR OUT terminal under S-VIDEO.
Example:
Monitor is connected with the component.
Monitor is connected with the video or S-video.
BASIC OPERATION
(PLAY BACK)
SELECTING AN INPUT SOURCE
Before you can listen to any input media, you must
first select the input source on the SR5500.
Example : DVD
To select DVD, turn the INPUT FUNCTION
SELECTOR knob on the front panel or simply
press the DVD button on the remote.
After you have selected DVD, simply turn on the
DVD player and play the DVD.
• As the input source is changed, the new input
n a m e w i l l a p p e a r m o m e n t a r i l y a n O S D
information on the video display. The input
name will also appear in the display, on the
front-panel.
• As the input is changed, the SR5500 will
automatically switch to the digital input,
surround mode, attenuation, and night mode
s t a t u s w h i c h w e r e e n t e r e d d u r i n g t h e
configuration process for that source.
• When an audio source is selected, the last video
input used remains routed to the VCR1 & DSS/
VCR2 Outputs and Monitor Output. This
permits simultaneous viewing and listening to
different sources.
• When a Video source is selected, the video
signal for that input will be routed to the Monitor
Output jacks and will be viewable on a TV
monitor connected to the SR5500.
If a component video input is connected to the
DVD or DSS component inputs, it will be routed
to the Component Video Output . Make certain
that your TV is set to the proper input to view the
signal.
ADJUSTING THE MAIN VOLUME
Adjust the volume to a comfortable level using the
VOLUME control knob on the front panel or VOL
/ buttons on the remote.
To increase the volume, turn the VOLUME knob
clockwise or press VOL button on the remote, to
decrease the volume, turn counterclockwise or
press
VOL button on the remote.
Notes:
• The volume can be adjusted within the range of –
∞ to 18 dB, in steps of 1 dB.
• However, when the channel level is set as described
on page 19, if the volume for any channel is set at
+1 dB or greater, the volume cannot be adjusted up
to 18 dB.
(In this case the maximum volume adjustment
range is “18 dB - Maximum value of channel level)
ADJUSTING THE TONE (BASS &
TREBLE) CONTROL
During a listening session you may wish to adjust
the Bass and Treble Control
to suit your listening
tastes or room acoustics.
(Using the remote control unit)
To adjust the bass effect, press BASS or BASS
on the remote.
To adjust the treble effect, press
TREBLE or
TREBLE on the remote.
Note:
• The tone control function can work in the AUTO
Surround, Stereo, Dolby PLIIx, DTS, DTS-ES,
and Multi Ch. Stereo mode.
CH.SEL LIP.SYNC
PTY SUB-T/ATT AUDIO INPUT/DISC+
F.DIRECT RDS
TUNE/SEARCH
T-MODE
TREBLE
CHANNEL/SKIP
BASS
A/D P.SCAN/V-OFF
7.1CH IN STEREO MCH-ST
MEMO CLEAR
DISPLAY
NIGHT CSII EX/ES VIRTUAL
3 2 1
6 5 4
9 8
0
7
VOL. TV VOL. MAIN SLEEP MUTE
AMP
TUNER CD TAPE CDR/MD
DVD
POWER
VCR1 DSS/VCR2 TV
AUX1
SURROUND
AV SURROUND RECEIVER SR5500
DOWN UP
VOLUME INPUT SELECTOR
POWER ON / STANDBY PHONES STANDBY MUTE MULTI M. SPEAKER B 7.1CH INPUT PURE SETUP DIRECT SIMPLE AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR T-MODE EXIT BAND MODE
AUX 1 INPUT AUDIO S-VIDEO VIDEO L R
VIDEO
or S-VIDEO
or component
component
SURROUND
AV SURROUND RECEIVER SR5500
DOWN UP
VOLUME INPUT SELECTOR
POWER ON / STANDBY PHONES STANDBY MUTE MULTI M. SPEAKER B 7.1CH INPUT PURE SETUP DIRECT SIMPLE
AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR
T-MODE EXIT BAND
MODE
AUX 1 INPUT AUDIO S-VIDEO VIDEO L R
VIDEO
or S-VIDEO
VIDEO
or S-VIDEO
SURROUND
AV SURROUND RECEIVER SR5500
DOWN UP
VOLUME INPUT SELECTOR
POWER ON / STANDBY PHONES STANDBY MUTE MULTI M. SPEAKER B 7.1CH INPUT PURE SETUP DIRECT SIMPLE
AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR T-MODE EXIT BAND MODE AUX 1 INPUT AUDIO S-VIDEO VIDEO L R
VIDEO
or S-VIDEO component
TUNE/SEARCH TREBLE
CHANNEL/SKIP
BASS
A/D P.SCAN/V-OFF
7.1CH IN STEREO MCH-ST
MEMO CLEAR
DISPLAY
NIGHT CSII EX/ES VIRTUAL
DTS PURE DIRECT AUTO 3 2 1
6 5 4
9 8
0
7
T.TONE MENU OFF SET UP/
ENTER
SURROUND
AV SURROUND RECEIVER SR5500 INPUT SELECTOR
POWER ON / STANDBY PHONES
STANDBY
MULTI M. SPEAKER B PURE SETUP DIRECT SIMPLE
AUTO HT-EQ MENU
MODE
DISP MULTI AUTO TUNED SLEEP SURR AUTO DIRECT
MENU OSD
VOL. TV VOL. MAIN SLEEP MUTE
AMP
TUNER CD TAPE CDR/MD
DVD VCR1 DSS/VCR2 TV
ENTER
AUX1
DOWN UP
VOLUME
MUTE 7.1CH INPUT DISPLAY MEMORY CLEAR
T-MODE EXIT BAND
EAK ANALOG DIGITAL ATT EQ DIGITAL SURROUND
AAC PCM L C R SL S SR LFE
AUX 1 INPUT AUDIO S-VIDEO VIDEO L R
04.8.2, 4:13 PM Page 23