Marantz SA-11S1 - Manual (Page 12)

8
ENGLISH
CONNECTIONS
Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For
correct connection please refer to instruction manuals of stereo system to be connected.
Caution: Do not connect output from this unit to PHONO input of your audio system.
1. Connect the audio cable q to this unit’s front speaker outputs and the stereo inputs on your amplifier,
receiver or stereo system.
2. Connect the optical cable w, coaxial cable e to the digital input on your AV amplifier, D/A converter, CD-
R, etc..
* Signal will be output from the digital audio out jacks (OPT./COAX.) only when an Audio CD disc is played.
No signal is output when playing a Super Audio CD.
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF PHONES
VOLUME A
TONE
SPEAKER
B SPEAKER
REC OUT
PRE OUT
ATT.
MC
OPERATE
PHONO
DISPLAY
SELECTOR INPUT
To Analog Audio output
(white) (red)
To Digital Audio
output
w
(Optional)
e
(Optional)
Left
speaker Right
speaker
Audio cable q
(Supplied)
To audio input
terminals on amplifier
Connect to digital input
terminals of receiver, D/A
converter or CD recorder,
etc..
Example)
PM-11S1
To balanced
input terminals
on amplifier
Balanced
connection cord q
(Optional)
04.8.3, 4:42 AM Page 8