beautypg.com

Rear panel – Marantz SR5600 User Manual

Page 10

background image

ENGLISH

6

y Preamp Outputs

(L, R, SL, SR, SBL, SBR, C)

Jacks for L(front left), R (front right), C (Center), SL
(surround left), SR (surround right), SBL (surround
back left) and SBR (surround back right).
Use these jacks for connection to external power
amplifiers.

u AC INLET

Plug the supplied power cord into this AC INLET
and then into the power outlet on the wall.
SR5600 can be powered by 230V AC only.

i AC OUTLETS

Connect the AC power cable of component such
as a DVD or CD player to this outlet.
The marked SWITCHED provides power only
when the SR5600 is turned on and is useful for
components which you use every time you play
your system.

Caution:

• In order to avoid potential turn-off thumps,

anything plugged into these outlets should be
powered up before the SR5600 is turned on.

• The capacity of this AC outlet is 100W. Do not

connect devices that consume electricity more
than the capacity of these AC outlet. If the total
power consumption of the connected devices
exceeds the capacity, the protection circuit shuts
down the power supply.

o Speaker outputs terminals

Seven terminals are provided for the front left, front
right, front center, surround left, surround right,
surround back left and surround back right
speakers.

Note:

• You can use surround back speaker terminals as

M (Multiroom) SPEAKER B terminals, when you
use no surround back speaker.

!0 Subwoofer Output

Connect this jack to the line level input of a
powered subwoofer. If an external subwoofer
amplifier is used, connect this jack to the
subwoofer amplifier input. If you are using two
subwoofers, either powered or with a 2 channel
subwoofer amplifier, connect a “Y” connector to
the subwoofer output jack and run one cable from
it to each subwoofer amplifier.

!1 7.1 CHANNEL or AUX2 INPUT

By connecting a DVD Audio player, SACD
multichannel player, or other components that has
a multichannel port, you can playback the audio
with 5.1 channel or 7.1 channel outputs.

!2 Multiroom Outputs (Audio L&R)

These are the audio output jacks for the Multi zone
(Multi room).
Connect these jacks to optional audio power
amplifiers to listen the source selected by the
multiroom system in a remote room.

!3 MULTI ROOM REMOTE IN/OUT terminals

IN: Connect to a multi-room remote control

device, available from your Marantz dealer.

OUT: C o n n e c t t o t h e M a r a n t z c o m p o n e n t

equipped with remote control (RC-5)
terminals in Multi zone (Multi room).

!4 REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with
remote control (RC-5) terminals.

!5 AUDIO IN/OUT (CD, TAPE, CD-R, TV,

DVD, VCR1, DSS/VCR2)

These are the analog audio inputs and outputs.
There are 7 audio inputs (4 of which are linked to
video inputs) and 4 audio outputs (2 of which are
linked to video outputs). The audio jacks are
nominally labeled for cassette tape decks,
compact disc players, DVD players and etc.... The
audio inputs and outputs require RCA-type
connectors.

!6 DIGITAL INPUT (Dig.1 - 4) / OUTPUT

(coaxial, optical)

These are the digital audio inputs and outputs.
There are 2 digital inputs with coaxial jacks, 2 with
optical jacks.
The inputs accept digital audio signals from a
compact disc, LD, DVD, or other digital source
component.
For digital output, there is 1 coaxial output and 1
optical output.
The digital outputs can be connected to MD
recorders, CD recorders, DAT decks, or other
similar components.

REAR PANEL

r COMPONENT VIDEO INPUT/OUTPUT

If your DVD player or other device has component
video connectors, be sure to connect them to
these component video connectors on the
SR5600. The SR5600 has two component video
input connectors to obtain the color information (Y,
C

B

, C

R

) directly from the recorded DVD signal or

other video component and one component video
output connector to output it directly into the matrix
decoder of the display device.
By sending the pure DVD component video signal
directly, the DVD signal forgoes the extra
processing that normally would degrade the
image. The result is vastly increased image
quality, with incredibly life like colors and crisp
detail.
When the video convert function is enabled, video
and S-video images can be output to the
COMPONENT MOINTOR OUT jack.

t MONITOR OUT

This is a monitor output and each one includes
both composite video and S-video configurations.
W h e n c o n n e c t i n g t w o v i d e o m o n i t o r s o r
televisions, be aware that the OSD interface can
be used with both MONITOR OUT connections.

q VIDEO IN/OUT (TV, DVD, VCR1, DSS/VCR2)

These are the video inputs and outputs. There are
4 video inputs and 2 video outputs and each one
includes both composite video and S-video
configurations. Connect VCRs, DVD players, and
other video components to the video inputs.
The 2 video output channels can be used to be
connected to video tape recorders for making
recordings.
The input signals of video and S-video are
converted each other, and each of the converted
video signals can be output.

w FM antenna terminal (75 ohms)

Connect an external FM antenna with a coaxial
cable, or a cable network FM source.

AM antenna and ground terminals

Connect the supplied AM loop antenna. Use the
terminals marked “AM” and “GND”. The supplied
AM loop antenna will provide good AM reception in
most areas. Position the loop antenna until you
hear the best reception.

e RS-232C

The RS-232C port is to be used in conjunction with
an external controller to control the operation of the
SR5600 by using an external device.

AM

GND

ANTENNA

COMPONENT VIDEO

M.SPEAKER B

L

L

SURROUND

CENTER

FRONT

R

R

L

R

SURROUND BACK

MODEL NO.SR5600

100W MAX.

230V

50HZ

AC OUTLET

SPEAKER SYSTEMS : 6-8 OHMS

AC IN

SWITCHED

FM (75

)

CB

/

PB

CR

/

PR

CR

/

PR

CR

/

PR

CB

/

PB

CB

/

PB

INPUT-1

Y

Y

MONITOR OUT

INPUT-2

Y

COAX.

4

2

OPT.

1

3

DIGITAL OUT

DIGITAL IN

MONITOR

(AUX2)

OUT

TV

VCR1

MONITOR

VIDEO

OUT

IN

IN

OUT

TAPE

CDR/MD

OUT

SW

OUT

IN

CD

SBL

SBR

SL

L

IN

OUT

IN

7.1CH

AUDIO

SR

IN

RC-5

SW

R

IN

R

TV

DVD

DSS/VCR2

R

SR

L

SL

PRE

OUT

SBL

SBR

L

VCR1

VCR1

OUT

OUT

IN

DSS/VCR2

OUT

IN

MULTI

OUT

RC

RS-232C

C

DSS/VCR2

DVD

S-VIDEO

OUT

IN

C

DVD

TV

OUT

MULTI

!0

!4 !3 !2

!1

t

q w

r

y

e

u

i

!6 !5

o

05.6.3, 3:57 PM

Page 6

This manual is related to the following products: