beautypg.com

Record speed, One-touch recording (otr), 1start recording – Go-Video DV2130 User Manual

Page 57: 2set record speed, Maximum recording time - sp vs. slp, 2activate otr, 3add recording time

background image

57

Record Speed

You can slow down the recording speed from SP to SLP in order to fit
six hours of programming on a T-120 tape.

1

Start Recording

Follow the Basic Recording instructions on page 55.

2

Set Record Speed

Press the SP/SLP button on the remote control to set the Record
Speed to one of the following options:

• SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording time (3 times SP).

NOTE: The selected Record Speed will appear on the front panel
display and on-screen display.

Maximum Recording Time - SP vs. SLP

Tape Length SP (Standard Play) SLP (Super Long Play)

T-120

2 hrs

6 hrs

T-160

2hrs 40 mins

8 hrs

T-180

3 hrs

9 hrs

ENTER

CLEAR

LAST CH

REPEAT

R

ET

U

VIE

W

DISC MENU

SUBTITLE

MODE

ANGLE

MARK

REC

SP/SLP

TIMER SEARCH/IDX

2

One-Touch Recording (OTR) allows you to add recording time in
30-minute increments up to 9 hours and 30 minutes at the touch of
a button.

1

Start Recording

Follow the instructions on page 55 to begin recording.

2

Activate OTR

While in Record mode, press the REC button again to activate
One-Touch Recording (OTR).

• Record length 0:30 appears on the On-Screen Display and the

DVD+VCR will record for exactly 30 minutes.

3

Add Recording Time

Continue pressing REC to add recording time in 30 minute
increments up to 4 hours.
• The DVD+VCR stops recording automatically when the recording

time has elapsed. If you press POWER during OTR recording,
the DVD+VCR will power off automatically when the recording
time has elapsed.

One-Touch Recording (OTR)

0:30 - 1:00 - ...
- 9:00 - 9:30

RECORD

0:00:00

SP

OTR 0:30

0:00:00

SP