GE 0007 - Manual (Page 53)

5
NEW CALL XX XX represents the number of new CID records not
reviewed.
NO CALLS Indicates there are no CID records in memory.
NO USER MEMORY Indicates the memory location contains no user
memories and the user is trying to mark a specific
user record for VIP MELODY.
OUT OF RANGE May indicate handset is too far away from the base
or that the power has been interrupted. Move closer
and check connections.
PAGING or Someone pressed the find button on the base
PAGING FROM or delete/intercom/conf button on the handset.
REPT Indicates a repeat call message. Indicates a new
call from the same number was received more than
once.
SEARCHING Indicates handset is searching for the base.
SPKR Indicates the handset is in speakerphone mode.
UNKNOWN CALLER/ Indicates incoming call is from an area not
NAME/NUMBER serviced by CID or the CID information was not sent.
Answering System Display Messages
The following messages show the status of the answering system or help you set up
and use the system.
0-59
Indicates the total number of messages.
CL (blinking) The voice time/day stamp needs to be set.
- - Answering system is turned off.
An (blinking) The system is answering a call.
F (blinking) Answering system memory is full.
Six bars (blinking) The system is recording a memo or an
announcement.
LA (Line Access) External line remote answering system.