GE 0007 - Manual (Page 31)

1
6. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the current time shows in the display.
Equalizer
This feature lets you to adjust the audio quality.
From the Handset Setup Menu:
1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to
Equalizer.
. Press the mute/menu OK button to enter the menu.
. Use the CALLER ID-VOLUME ( 6 or 5) button to scroll to desired selection. The
default is Natural.
. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone.
Area Code
From the Handset Setup Menu:
1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the
AREA CODE
sub-menu.
. Press mute/menu OK button to enter the menu. SET AREA CODE - - - shows in
the display.
. Use the touch-tone pad to enter your -digit area code.
. Press the mute/menu OK button to confirm. You will hear a confirmation tone and
the new area code shows in the display.
NOTE: To restore the default setting to - - -, press and release delete/
intercom/conf when SET AREA CODE shows in the display.
Tone/Pulse
From the Handset Setup Menu:
1. Press the CALLER ID-VOLUME ( 5 or 6) button to scroll to the
TONE PULSE
sub-menu.
. Press mute/menu OK button to enter the menu. TONE/PULSE 41TONE 2PULSE
shows in the display. The default setting is “1 TONE”.
. Use the touch-tone pad or CALLER ID-VOLUME ( 5 or 6) to enter 1 TONE or 2
PULSE.