Go-Video DVS3100 - Manual (Page 25)

CHAPTER 2 - CONNECTIONS 15
Connecting a TV/Aux Component
Connect Audio
Connect audio/video cables from the Audio Out
jack on the back of your television/auxiliary compo-
nent to the AUX IN jack (R, L) on the back of the
DVS3100/3000.
Connect Video
Connect an audio/video cable from the Video Out
jack on the back of your television/auxiliary compo-
nent to the AUX IN jack (V) on the back of the
DVS3100/3000.
CAUTION: When connecting a TV, be sure the
audio/video output of the TV is the TV’s tuner (i.e.,
Tuner Out, NOT TV Out). This will prevent a
feedback loop from occurring, which may damage
your speakers or other equipment. Check your TV
owner’s guide to be sure your TV is equipped with a
Tuner Output before making this connection.
Select TV/Aux
Press the AUX button on the DVS front panel or the
TV/AUX button on the remote control.
1
2
3
Follow these steps to connect
a television or other auxiliary
component, such as a stereo,
to your DVS3100/3000. TV/Aux
DVS3100/3000
VIDEO OUT AUDIO OUT
1 2