Furuno MARINE VHF RADIOTELEPHONE FM-3000 - Manual (Page 35)

26
5.DSC Operation
5.6.6 Transmitting Position Report call
Transmit a Position Report call when you want to anounce
your own position to a specific ship and to get answer, etc.
q Push [DSC/ENT] to enter the DSC menu.
w Rotate [CHANNEL] to select “POS Report,” push
[DSC/ENT].
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or “Manual Input,” push
[DSC/ENT].
• The ID code for the Position Report call can be set in advance.
(p. 13)
• When “Manual Input” is selected, set the 9-digit ID code
(1st digit must not be ‘0’) for the individual you wish to call by
using [CHANNEL].
- Push [CH/WX] or [SCAN] for cursor movement.
- After 9-digit is input, push [DSC/ENT] to set the ID code.
Note: When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is
connected, next steps r, t (Current position/time program-
ming) do not appear. Go to step y. (next page)
Sel Address
Ricky
Manual Set
˘Tom
Sel Item
All ships
POS Request
˘POS Report
r The position information appears. Set the current posi-
tion, push [DSC/ENT].
• Edit the digit of your position data by using [CHANNEL].
- Push [CH/WX] or [SCAN] for cursor movement.
- After editing latitude data, select “N”; North latitude or “S”;
South latitude.
- After editing longitude data, select “E”; East longitude or “W”;
West longitude.
- Push [HI/LO] to clear the position data.
t The time information appears. Set the current UTC time,
push [DSC/ENT].
• Edit the digit of the current UTC time by using [CHANNEL].
- Push [CH/WX] or [SCAN] for cursor movement.
- Push [HI/LO] to clear the time data.
Input time
UTC :
Null˘[H/L]
Input POS
° .
- ° .
Null˘[H/L]