Furuno MARINE VHF RADIOTELEPHONE FM-3000 - Manual (Page 23)

14
5.DSC Operation
r Set the individual ID and ID name.
• Edit the 9 digits of the appropriate distress ID by using [CHAN-
NEL].
- Push [CH/WX] or [SCAN] to move the cursor forward or back-
ward, respectively.
Note: 1st digit ‘0’ is fixed for a group ID. Thus an address ID
input cannot started with ‘0.’ When you input 1st digit ‘0’ and other
8 digits, the ID is automatically registered as a group ID.
t Push [DSC/ENT] to program and exit the condition to the
normal operation.
D D Deleting Address ID/Group ID
q Push [DSC/ENT] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” push
[DSC/ENT].
e Rotate [CHANNEL] to select “Delete ID,” push
[DSC/ENT].
• When no address ID is programmed, the transceiver exits the
DSC menu automatically.
r Rotate [CHANNEL] to select the desired ID name for
deleting.
t The delete confirmation display will appear when
[DSC/ENT] is pushed.
• Push [HI/LO] to delete ID and exit the DSC Menu.
• Push [DSC/ENT] to cancel deleting and exit the DSC Menu.
Delete ID
Ricky
˘Bill
Tom
Set up
Add ID
˘Delete ID
Offset Time
Add ID
ID:
NAME: