Furuno FAX-30 - Manual (Page 78)

6. MAINTENANCE, TROUBLESHOOTING
6-6
6.7 Clearing Data: PC
You may clear all facsimile images, navtex messages and the entire memory
contents to start afresh.
1. At the facsimile or navtex standby display, click SYSTEM SETUP.
2. Click CLEAR MEMORY.
CLEAR MEMORY
CLEAR ALL IMAGES Yes No
CLEAR ALL MESSAGES Yes No
CLEAR ALL MEMORY Yes No
OK
< back
Clear memory options
3. Click Yes for the memory(s) to clear.
Note:
Clearing all memories erases all fax images, navtex messages and all
setting data (for example, user-set stations).
4. Click OK.
5. You are asked if you are sure to clear the memory(s) selected. Click OK to
clear; Cancel to escape.
6. Click “