Furuno FAX-30 - Manual (Page 22)

1. OVERVIEW, SETUP
1-8
1.2.2 Choosing the receive mode
The FAX-30 has three modes: facsimile only, navtex only, and facsimile (timer) &
navtex. Choose desired mode as follows.
1. At the facsimile or navtex standby display, click RX MODE.
¤
¡
¡
WX FAX
NAVTEX
FAX(TIMER) & NAVTEX
OK
RX MODE
< back
RX mode options
2. Click receive mode desired and then click OK.
3. Click “
1.2.3 Logging out
The FAX-30 cannot be accessed simultaneously by multiple PCs. For this
reason, log out a PC from the FAX-30 when its use is not required.
1. At the facsimile or navtex menu display, click “
receiver top display. (See the illustration at the top of the previous page.)
2. Click LOGOUT to logout the PC from FAX-30.