Furuno FAX-30 User Manual
Page 46
3. FAX OPERATION: PC
3-4
11. Click ON below FREQUENCY.
12. Click OK.
13. Click “
15. At the facsimile standby display, click TIMER SETUP.
16. Click PROGRAM LIST.
17. Click START.
18. Click OK.
19. Click “
Then, the FAX-30 will receive facsimile broadcasts according to the timer
schedule. Facsimile images are received line by line, taking 30-40 minutes to
receive depending on the size of the image and drum rotation speed at the
facsimile station. After a facsimile image is received it is compressed and stored
in the image memory and then posted on the facsimile standby display screen.
This process takes 3-5 minutes.
3.2.3
Turning on/off specific timer programs
1. At the facsimile standby display, click TIMER SETUP. 3.2.4 Clearing all timer programs You may clear all timer programs as follows:
2. Click PROGRAM LIST.
3. Click the center column of the program no. you want to turn on or off.
4. Click ON or OFF as appropriate.
5. Click OK.
6. Click “
1. At the facsimile standby display, click TIMER SETUP.
2. Click PROGRAM LIST.
3. Click CLEAR ALL at the top of the screen.
4. You are asked “Are you sure to clear all?”
5. Click Yes to reset; Cancel to escape.
6. Click “