Fujitsu Siemens Computers LifeBook A3110 - Manual (Page 51)

41
U s e r I n s t a l l a b l e F e a t u r e s
Figure 4-11. Removing a Memory Upgrade Module
4. Store the memory upgrade module in a static
guarded sleeve.
5. Replace the cover and reinstall the screw.
CHECKING THE MEMORY CAPACITY
Once you have changed the system memory capacity by
replacing the installed module with a larger one, be sure
to check that your notebook has recognized the change.
Check the memory capacity by clicking [Start] ->
Settings -> Control Panel, then double-clicking the
System icon. Select the General tab and check the
amount of memory under “Computer:”.
The system can use up to 256 MB (selectable in the BIOS
from 32 MB to 256 MB) of shared memory for video
RAM using Unified Memory Architecture (UMA). The
amount of selectable Video RAM is dependent upon the
amount of main memory installed. (See Video RAM on
page 69 for more information)
If the total memory displayed is incorrect,
check that your memory upgrade module
is properly installed. (If the module is prop-
erly installed and the capacity is still not
correctly recognized, see Troubleshooting
on page 47.)
falcon.book Page 41 Friday, August 4, 2006 11:12 AM