beautypg.com

Setup menu, Operating instructions (continued), Auto adjust – Hitachi 55PD5000 User Manual

Page 22: Horizontal position, Vertical position, Horizontal clock, Clock phase, Reset, Input level, Frequency display

background image

Selected characters

Setup hint

Auto Adjust*

(Menu)

Adjust

Pressing the OK button here,
Automatic regulation is started.

Horizontal Position, Vertical Position, Horizontal Clock and Clock
Phase are adjusted automatically.

Horizontal Position

Moves the horizontal position
to left.

Moves the horizontal position
to right.

Adjust the left-side display position.
(This function is only for RGB2. It’s not available (grayed out) for
RGB1.)

Vertical Position

Moves down the vertical
position.

Moves up the vertical position. Adjust the vertical display position.

(This function is only for RGB2. It’s not available (grayed out) for
RGB1.)

Horizontal Clock

Reduces the dot clock
frequency (shrinks the right
side).

Increases the dot clock
frequency (expands the right
side).

Adjust for maximum character clarity.
(This function is only for RGB2. It’s not available (grayed out) for
RGB1.)

Clock Phase

Slows the dot clock phase
(shifts slightly to left).

Advances the dot clock phase
(shifts slightly to right).

Adjust for clear character visibility.
(This function is only for RGB2. It’s not available (grayed out) for
RGB1.)

Reset

(off the function)

(waiting to reset)

The original factory settings for the items of this Menu page can be
restored by pressing the OK button. (This is effective only for RGB2.)

Input Level

0.7V 1.0V

Normally set to 0.7 V. If white is found to spread across the screen, set
to 1.0 V. (This is effective only for RGB2.)

Frequency Display

Off On

Set this to Off if the frequency information of the Input Signal Screen
Display is not required.

WVGA Type

Off On

This is only available for W-VGA signal.
When it is set to On, the display area modecan be selected Full or Real.
(RGB2 (ANALOG) INPUT only)···55"

WXGA Mode (55")

Off 1280x768 1366x768

This is only available for W-XGA signal.
When it is set to W-XGA mode, the display area modecan be selected Full or Real.
(RGB2 (ANALOG) INPUT only)

Vertical Filter

Off On

Turn On when concerned about screen flicker.

Frequency Mode

Movie PC

Set to Movie when viewing moving images on a personal computer.

RGB1

Optional (grayed out)

RGB2

Optional (grayed out)

20

SETUP MENU

Picture
Audio
Timer
Function
Setup
Language
Select
OK Set

Setup
Auto Adjust

Adjust

Horizontal Position

0

Vertical Position

+ 31

Horizontal Clock

– 20

Clock Phase

10

Reset

Reset

Select Return Exit

Setup
Input Level

0.7V

Frequency Display

Off

WVGA Type

Off

Vertical Filter

On

Frequency Mode

Movie

RGB1

DVI-PC

RGB2

RGB

Select Set Return

OK

MENU

OPERATING INSTRUCTIONS (continued)

* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.

OK

Horizontal Position

0

Next / Prev Adjust Return

Setup
Auto Adjust

Adjust

Horizontal Position

0

Vertical Position

+ 31

Horizontal Clock

– 20

Clock Phase

10

Reset

Reset

Select Return Exit

Clock Phase

10

Next / Prev Adjust Return

OK

Setup
Input Level

0.7V

Frequency Display

Off

WVGA Type

Off

WXGA Mode

Off

Vertical Filter

On

Frequency Mode

Movie

RGB1

DVI-PC

RGB2

RGB

Select Set Return

(37")

(55")

This manual is related to the following products: