Hitachi 55PD5000 - Manual (Page 17)

15
ENGLISH
Size Switching
Each time the SIZE button of the remote control or the monitor is pressed, the screen display area will change in
sequence and the status will be displayed at the bottom of the screen.
Normal Full Zoom1
Real Zoom3 Zoom2
SIZE button
AV1 AV2
RGB 1 RGB 2
AV3
MUTE VOL
AV4
AUTO PinP
OK
SIZE RECALL
MENU
ID ID SET
SIZE button
RECALL button
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the RECALL button of the remote control or the monitor.
• The display will go out in approximately 6 seconds.
RECALL button
*
RGB2
RGB
H : 48.4kHz
V : 60.1 Hz
-- -- Min.
-- -- : -- --
OFF
Input mode
Signal mode
Input horizontal frequency
Input vertical frequency
Off-timer
On-timer
RGB
Display area selection diagram (RGB input)
Display
Resolution
Full Normal Zoom1 Zoom2 Zoom3
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024 (SXGA)
1600 X 1200 (UXGA)
1366 X 768 (WXGA)
55" only selected
character WXGA
Type.
can't select
Display
Resolution
37" Model 55" Model
640 X 480 (VGA)
800 X 600 (SVGA)
can't select
1024 X 768 (XGA)
1280 X 768 (WXGA)
1280 X 1024 (SXGA)
can't select
1600 X 1200 (UXGA)
* This mode is only available for VGA (640 X 480) and WVGA (864 X 480).···37",55" Model
This mode is only available for SVGA (800 x 600) XGA (1024 x 768) and WXGA (1280 x
768).···55" Model only
Real mode position