Harbor Freight Tools 92772 - Manual (Page 7)

Page 7 For technical questions, please call 1‑800‑444‑3353. SKU 92772
7. Make sure the extension cord is properly
wired and in good electrical condition.
Always replace a damaged extension
cord or have it repaired by a qualified
electrician before using it.
8. Protect the extension cords from sharp
objects, excessive heat, and damp or
wet areas.
RECOMMENDED MINIMUM WIRE GAUGE
FOR EXTENSION CORDS* (120/240 VOLT)
NAMEPLATE
AMPERES
(at full load)
EXTENSION CORD
LENGTH
25’ 50’ 75’ 100’ 150’
0 – 2.0 18 18 18 18 16
2.1 – 3.4 18 18 18 16 14
3.5 – 5.0 18 18 16 14 12
5.1 – 7.0 18 16 14 12 12
7.1 – 12.0 18 14 12 10 -
12.1 – 16.0 14 12 10 - -
16.1 – 20.0 12 10 - - -
TABLE A
* Based on limiting the line volt‑
age drop to five volts at 150% of
the rated amperes.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
n0 xxxx/min.
No Load Revolutions per Minute
(RPM)
SPM
Strokes Per Minute
SPECIFICATIONS
Electrical Input 120V~ / 60Hz / 5.5A
Laser Power
2 “AAA” Batteries
(sold separately)
Speed Rating
500 to 3,000 SPM
6 settings
Stroke Length 11/16 ˝ with 4 orbital settings
Blade Type Universal - Clamp Type Holder
Saw Blades
(2x) 4 ˝ x 10 TPI,
(1x) 3-1/4 ˝ x 25 TPI
Bevel Adjustment 0-45° Left / 0-45° Right
Maximum Cutting Depth 2-1/2˝ @ 90° (Wood) / 1/4˝ @ 90°
(Steel)
E194601