Channel menu, Automatic scan, Operation – haier 42HP25BAT User Manual
Page 22
This TV set has three methods to set channels, which are respectively Auto Scan, manual Scan fine tune.
In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV
set to set channel.
A password is required to gain access to Channel menu if the Lock of Edit program menu is turned on.
Automatic Scan
Note : the Channel menu will be only operated in normal TV mode.
Channel menu
- Automatically finds all channels available through antenna or cable inputs, and
stores them in memory on the All Channel List.
When
Air
is selected, the TV will detect antenna signals and will
search for antenna TV (NTSC and ATSC) channels available in
your local area.
When
Cable
is selected, the TV will detect cable company supplied
signals and will search for cable TV (NTSC,ATSC, QAM modulated)
channels available in your area.
1
Press the MENU button and then use / button to select the
Channel menu.
2
Press the button and then use / button to select Tuner.
3
Press the button and then use / button to Select
Cable
or
Air
mode.
4 Press the
OK
button
5
When you are satisfied with your choice, press MENU button to
return to the previous menu.
6
Press the / button to select Auto Scan.
7
Press the button and press the
OK
button to start searching.
8
To cancel searching, press the OK button.
: Move cursor, /OK: Go to submenu, EXIT/ MENU: Exit main menu
B
C
A
Video
Audio
Time
Channel
Function
Lock
Tuner Air
Auto Scan
Manual Scan
Fine Tune
Edit Program
Rename
Air
Cable
B
C
A
Video
Audio
Time
Channel
Function
Lock
OK
Cancel
Air Tuner
Number: 47
Found: 1
Tuner Air
Auto Scan
Manual Scan
Fine Tune
Edit Program
Rename
Operation
: Move cursor, OK: Enter, MENU: Return to upper menu,
EXIT: Exit main menu
22 PLASMA TV