Honeywell RTH6350 User Manual
Page 22
Advanced Installation Guide
69-2416ES—05 20
SETUP
WIRING
ASSIST
ANCE
TROUBLESHOOTING
Function 12: Manual/Auto Changeover
Done
Next
12
0
M28355
Press the
s
or
t
button to select Manual or Auto
Changeover:
NOTE: If Function 12 does not appear, please turn to the
next page to continue. This function is only available on
the RTH6450.
NOTE: System maintains a minimum 3 ºF
difference between heat and cool settings.
CAUTION: To avoid possible compressor
damage, set to option 0 if the outside
temperature drops below 50 ºF (10 ºC).
0
Manual Changeover: (Heat/Off/Cool)
1
Automatic Changeover: (Heat/Off/Cool/Auto)
Automatically turns on heat or cool based on room
temperatures.
M28351
Press to change setting.
When correct setting is
selected, press
NEXT to
display next function.