Operating instructions controls, Operation – Harbor Freight Tools 92158 User Manual
Page 9
Page 9
SKU 92158
for technical questions, please call 1-800-444-3353.
Turn the Slide Bar (36) so it points to the Pulley (65) and tightens the tension on the
Sanding Belt (66). Replace Cover (23) and Screw (26).
If needed, adjust the tracking of the Sanding Belt by turning the Adjustment Screw (59).
Screw (26)
Cover (23)
Slide Lock (36)
Roller (65)
Sanding
Belt (66)
Spindle (24)
OperAting instructiOns
controls
Switch (48)
Brush Cover (41)
Screw (49)
Angle Adjust
Bracket (22)
Slide Lock (36)
Loosen Sanding Belt
Adjusting Screw (59)
Sanding Belt Tracking
Operation
1.
Secure the workpiece to be sanded.
2.
Loosen Screw (49) and adjust Bracket (22) to the desired angle for sanding.
3.
Plug the Line Cord (52) into a GFCI electrical outlet.
4. Always follow all safety instructions and warnings in this instruction manual.
4.
5.