Specifications, Save this manual, General safety rules – Harbor Freight Tools 92158 User Manual
Page 2: Work area, Electrical safety
Page 2
SKU 92158
for technical questions, please call 1-800-444-3353.
specificAtiOns
Motor
120 V~, 60 Hz, 600 watts, n
0
10,000/min
Belt Speed
2300 FPM (feet per minute) (single speed);
Gear driven
Sanding Area
1/2 (W) x 5 (L) Inches
Pivot Head
Adjustable 180°
Line Cord
Two prong polarized, 8 feet, 9 inches long
Overall Dimensions
11 (L) x 4-1/2 (H) x 3 (W) Inches, 18-1/4 (L) with
sanding head
Weight
4.8 lb.
Accessories
5 – Sanding Belts
sAVe this mAnuAl
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
generAl sAfety rules
wArning!
reAd And understAnd All instructiOns
failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
sAVe these instructiOns
work Area
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2.
do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
electrical safety
4.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
5.
do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
reV 09/06
230677