Harbor Freight Tools 92158 User Manual
Page 8
Page 8
SKU 92158
for technical questions, please call 1-800-444-3353.
unpAcKing
When unpacking, check to make sure that all the parts are included. Refer to the Assembly
Drawing and Parts List at the end of this manual. Not shown are five accessory Sanding
Belts.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.
Assembly instructiOns
wArning! make sure the power switch of the tool is in its Off (O) position and
that the tool is unplugged from its electrical outlet before performing any assembly,
inspection, maintenance, or cleaning procedures.
installing the sanding belt
Remove Screw (26) and Cover (23). Refer to the photos on the next page.
Turn the Slide Lock (36) completely to one side.
This reduces the tension on the Roller (65) so that the Sanding Belt (66) can be slipped
over easily.
Place the Sanding Belt (66) over the Roller (65) and the Spindle (24).
1.
2.
3.
symbOlOgy
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
n0 xxxx/min.
No Load Revolutions per Minute (RPM)