Husqvarna 355FX - Manual (Page 3)

CONTENTS
English – 3
Contents Note the f ollowing before
starting:
• Please read the operator’s manual carefully.
KEY TO SYMBOLS
Symbols 2
CONTENTS
Contents 3
Note the f ollowing before starting: 3
INTR ODUCTION
Dear Customer , 4
WHA T IS WHAT?
What is what on the clear ing saw? 5
What is what on the clearing saw? 6
What is what on the clearing saw? 7
GENERAL SAFETY PRECA UTIONS
Impor tant 8
Personal protective equipment 8
Machine
′
s safety equipment 9
Cutting equipment 12
ASSEMBL Y
Assemb ling the handlebar and throttle 15
Transport position, handlebar 15
Assembling the cutting equipment 15
Fitting the blade guard/combination guard, grass
blade and ball-bearing-mounted support cup
16
Fitting the blade guard and saw blade 16
Fitting other guards and cutting attachments 17
Adjusting the harness and clearing saw 18
Triobalance harness 18
FUEL HANDLING
Fuel saf ety 20
Fuel 20
Fuelling 21
ST ARTING AND STOPPING
Chec k before starting 22
Starting and stopping 22
W ORKING TECHNIQUES
Gener al working instructions 24
MAINTENANCE
Carb urettor 29
Muffler 31
Cooling system 31
Air filter 31
Bevel gear 32
Drive shaft 32
Spark plug 32
Winter use 32
Maintenance schedule 34
TECHNICAL D ATA
T echnical data 35
EC-declaration of conformity 37
!
W ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
W ARNING! A clearing saw, brushcutter
or trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.