Hotpoint HDA1OOOK - Manual (Page 15)

How to color
If you are redecorating, you can
change your dishwasher’s front
panels to match or blend with your
new colors.
panels are held in place by the
door trim and the trim on the panel
below the door. Each side of each
panel is a different color. Or you
can paint a panel with the color of
your own choice.
How to change door panel
1. Take out three trim screws on
either side of the dishwasher door.
Remove the side trim.
2. Slide out both insert panels together.
3. Put the color you want in front.
(Careful–edges may be sharp.)
4. Replace insert panels, side trim
and screws.
How to change lower panel
1. Remove four attachment
screws. (Two above the panel, two
below the panel.)
2. Remove the entire
3. Take out three screws and
remove the top trim.
4. Slide out both insert panels together.
5. Put the color you want in front.
6. Replace insert panels, top trim
and screws.
7. Replace the entire panel and four
attachment screws.
Color insert panels for both door
and panel can be replaced by
thick wood inserts to match your
kitchen cabinets. Get them from your
nearest cabinet or lumber dealer.
Dimensions for wood inserts:
Door Panel: H x W.
Lower Panel: H x W.
Note: Do not operate dishwasher
while changing panels or when
lower access panel is removed.
Change color in minutes. Just
remove trim and change.
If You Need Service
To obtain service, see your warranty
on the back page of this book.
We’re proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to follow for further
FIRST, contact the people who FINALLY, if your problem is still
serviced your appliance. Explain not resolved, write:
why you are not pleased. In most
Major Appliance
cases, this will solve the problem.
Consumer Action Panel
NEXT, if you are still not pleased, 20 North Drive
write all the details-including Chicago, Illinois 60606
your phone number—to:
Manager, Consumer Relations
Appliance Park
Louisville, Kentucky 40225
15